RFOCS RF Connector torque wrenches are used to properly install or disassemble a wide range of coaxial connectors. Properly torqueing of threaded RF coaxial connectors is essential for reliable, maximum performance interfaces. It not only ensures that the initial contact is proper, it also protects against changes in geometry during handling and operational environment conditions.
This series of torque wrenches is designed with a preset torque value.
When the preset torque value is reached, it will “break” and move through a small arc about the pivot pin.
The torque tolerance accuracy of RFOCS torque wrenches is within ±4%.
RF Break-Over Torque Wrenches
Click Part # to Purchase
Part # Description Wrench Size Preset Torque Colour
MOB-TR-001 For SMA/3.5mm/2.92mm/2.4mm, Normal Coupling Torque 8mm 5/16in 8.0 in.lbs Blue
MOB-TR-003 For N Type Connectors, Normal Coupling Torque 19.1mm 3/4in 8.0 in.lbs Blue
MOB-TR-004 For N/7mm Type Connectors, Proof Coupling Torque 7mm 3/4in 14.0 in.lbs Red
MOB-TR-005 For N Type Connectors, Normal Coupling Torque 20mm 25/32in 8.0 in.lbs Blue
MOB-TR-006 For For N Type Connectors, Proof Coupling Torque 20mm 25/32in 14.0 in.lbs Red
MOB-TR-008 For SC/N Type Connectors, Proof Coupling Torque 20.6mm 13/16in 14.0 in.lbs Red
MOB-TR-010 For TNC Connectors 15.9mm 5/8in 12.0 in.lbs Red
MOB-TR-016 For 1mm Type Connectors Preset Torque 6mm 15/64in 4.0 in.lbs Red
MOB-TR-017 For TNC Type Connectors Preset Torque 14.3mm 9/16in 6.0 in.lbs Blue
MOB-TR-019 For SMA Connectors 8mm 5/6in 5.0 in.lbs Blue
MOB-TR-087 For 7/16-DIN Type Connectors Preset Torque 32mm 1-1/4in 221.0 in.lbs [25 N*m] Red
MOB-TR-092 For 4.3/10 Type Connectors Preset Torque 22mm N/A 90.0 in.lbs [10.2 N*m] Red